Carbon Fiber High Gloss Woven Sheets

$164.00$855.50

SKU: CFL-WOVEN-HIGH-GLOSS

ACP’s High Gloss Twill Carbon Fiber Sheet provide a mirror-like finish ideally used in high-end decorative projects. Our proprietary Autoclave curing process produces consistent, high quality sheets every time.

Product Datasheet Icon

Description

ACP’s High Gloss Twill Carbon Fiber Sheet is an outstanding decorative laminate with a deep, glossy, three dimensional finish. It is constructed with layers unidirectional carbon fiber prepreg layed up in a 0/90 degree orientation with a single layer of 2×2 twill carbon fiber prepreg on each of the outside surfaces. This type of construction produces a decorative laminate that has the classic carbon fiber look but with greater strength and stiffness than to our Unidirectional Carbon Fiber Sheets.

The carbon fiber sheet is semi-flexible, yet remains stiff like cardstock. It can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces. One side features our recognized high gloss finish while available options for the opposite side include a high gloss, matte or adhesive backed finish.

Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.

These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2×2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Uses Include

  • Decorative Applications
  • Dashboards
  • Radio face plates
  • Guitars
  • Instrument panels
  • License plate holders
  • Clip boards
  • Door panels

Technical

Physical Properties

Thickness: .023″ +/-.007″

  • Material: Unidirectional Carbon Fiber Prepreg 2×2 Twill Weave Carbon Fiber Prepreg
  • Layup Construction: 0° Unidirectional Layup Single layer Twill on outer surface
  • Finish: Gloss/Matte, Gloss/Adhesive

 Thickness: .039″ and thicker +/-15%

  • Material: Unidirectional Carbon Fiber Prepreg 2×2 Twill Weave Carbon Fiber Prepreg
  • Layup Construction: 0/90° Unidirectional Layup Single layer Twill on outer surface
  • Finish: Gloss/Matte, Gloss/Gloss
  • Width: +/-0.25″
  • Resin Matrix: Epoxy with Built in UV Inhibitor
  • Fiber Volume: 60-65%

Technical Properties

  • Tensile Strength: 266 ksi
  • Tensile Modulus: 18.3 msi
  • Tensile Strain: 10,370
  • Compressive Strength: 193 ksi
  • Compressive Modulus: 16.5 msi

Please note: All data to be used as a guide only; not a specification.


Documents

Product Datasheet Icon

~Weight per ft²

  • .023″: 3.9 oz.
  • .039″: 5.5 oz.
  • .059″: 9.4 oz.
  • .086″: 12.2 oz.
  • .127″: 16.9 oz.
  • .164″: 21.9 oz.

Resources

Resources

Mechanical Properties of Carbon Fiber Composite Materials

Customize

Need something different? We’ve got you covered. As a leading manufacturer of composite structures you can rely on us to provide rapid, cost-effective and high-quality solutions to meet and exceed your project requirements.

We MAKE it. ACP manufacturers Carbon Fiber High Gloss Woven Sheets in-house and can customize this product to your specifications. ACP’s Woven Sheets are stocked in standard sheet sizes up to 24″ x 48″. Customizable options are available on a special order basis.

  • Fiber Selection
  • Thickness
  • Layup/Construction
  • Surface Finish
  • Size​s up to 60″ x 120″
  • Finishing

*ACP has a maximum work envelope of 60″ x 120″. Available options are contingent on tooling and material availability.

We CUSTOMIZE it. Finishing Services Include:

  • Bonding
  • CNC Machining
  • Clear Coating
  • Countersinking
  • Cutting
  • Painting
  • Silk-Screening

Request a Quote

Contact us today to discuss your requirements. Already know what your looking for?

REQUEST A QUOTE TODAY!

 

Clearance

Items starting with an “x” are product that are being sold as Clearance/Excess item(s). Items may be excess inventory that does not meet the stringent specifications of medical or aerospace applications, have blemishes and/or other imperfections as noted in the product descriptions. These items are sold “As Is”, are nonrefundable and will not be backordered. If an ordered quantity cannot be fulfilled, we will ship available on hand quantities and automatically cancel any remaining balance.

Reviews

There are no reviews yet.

Be the first to review “Carbon Fiber High Gloss Woven Sheets”

Your email address will not be published. Required fields are marked *