PRO-SET Infusion Hardener 210 – Fast Cure

$128.29$350.27

SKU: E-PROSET-INF-210

PRO-SET 210 Infusion Hardener is mixed with PRO-SET Resins to provide short pot life and cure time. This product has a pot life of 32 minutes at 72°F, working time of 75 to 90 minutes at 77°F, and will gel in 2 to 3 hours at 77°F.

Product Datasheet IconSafety Datasheet Icon

Description

PRO-SET 210 Infusion Hardener is mixed with PRO-SET Resins to provide short pot life and cure time. PRO-SET 210 Infusion Hardener has a pot life of 32 minutes at 72°F. Approximate working time of 75 to 90 minutes at 77° F. A typical laminate will be gelled in 2 to 3 hours at 77° F. Not sold as a kit. Must order Resin in addition to one of the hardeners.

Not sold as a kit. Must order a hardener in addition to the resin.
Shipping: Domestic Shipping via Ground Only

⚠️WARNING: This product can expose you to chemicals including Benzene which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical

Physical Properties mixed with 114 Resin

  • Mix Ratio:
    • Volume: 3.00 parts resin to 1 part hardener
    • Weight: 3.65 parts resin to 1 part hardener
  • 150g Pot Life: 32 minutes @ 72°F
  • Working Time: 75 to 90 Miuntes @ 77°F
  • Gelled: 2 to 3 Hours
  • Cure: Room Temperature
  • Color: Clear

Technical Properties mixed with 114 Resin

  • Viscosity, Mixed: 304 cP @ 72°F
  • Density, Cured: 9.53 lb/gal @ 72°F
  • Hardness: 86 Type D
  • Compression Yield: 14,700 psi
  • Tensile Strength: 8,670 psi
  • Tensile Modulus: 5.2E+5 psi
  • Tensile Elongation: 2.6%
  • Flexural Strength: 15,900 psi
  • Flexural Modulus: 5.28E+5 psi

Please note: All data to be used as a guide only; not a specification. Tests are performed at @ 72°F x 4 weeks. 


Documents

Product Datasheet IconSafety Datasheet Icon

Resources

Tips

Tips on how to use this product in certain applications are coming soon. If you would like to learn more about this product, give us a call at (800) 811-2009.

How to Guides

Preventing Bubbles in Epoxy Resin

Shipping

Due to U.S. Department of Transportation Hazardous Materials regulations and International Air Transport regulations we can only ship this product by domestic ground service within the contiguous United States.

Limited Quantities are stocked to ensure maximum shelf life of material, please allow a 2-3 week lead time from the date your order is placed. If stock is availble it will ship within the standard 2-3 day processing time.

Reviews

There are no reviews yet.

Be the first to review “PRO-SET Infusion Hardener 210 – Fast Cure”

Your email address will not be published. Required fields are marked *