Non-Porous Teflon® Coated Fiberglass

$1,120.00

SKU: VC-TEFLON-NP

Non-Porous Teflon® Coated Fiberglass is fiberglass fabric coated with a thin Teflon® layer which forms a non-stick, smooth surface. Ideal for controlling the resin content of a laminate when vacuum bagging.
Product Datasheet Icon

Description

Non-Porous Teflon® Coated Fiberglass is fiberglass fabric coated with a thin Teflon® layer which forms a non-stick, smooth surface. Often used as the first barrier between the composite laminate and the rest of the vacuum bagging materials, Porous Teflon® Coated Fiberglass is used to control the resin content of a laminate when vacuum bagging.

When applied on top of a wet laminate and covered with Breather Cloth, excess resin is drawn through the porous material and blotted up by the Breather Cloth. The amount of resin removed is contingent upon the number of layers ofBreather Cloth used. The Non-Porous surface will not retain resin and is also convenient to use on your table surface to allow for easy resin clean up.

Non-Porous Teflon® Coated Fiberglass can be used in conventional vacuum bagging, resin infusion and prepreg part manufacturing and is suitable in vacuum bagging applications up to 500°F (260°C).

Technical

Physical Properties

  • Overall Thickness: .0055″
  • Substrate Type: Woven fiberglass ( “E” type)
  • Coating Medium: Polytetrafluoroethylene Coated
  • Weight: .550 lbs/yd²

Technical Properties

  • Operating Temperature: -100°F to 500°F
  • Tensile Strength (warp/fill): 170 / 165 pounds/in of width
  • Tear Strength (warp/fill): 4.5 / 4 pounds-f (trapezoid method)
  • Dielectric Strength: 1,200 volts/mil
  • Adhesion (warp/fill): 4.00 / 4.00 pounds/in of width (resin to substrate)

Please note: All data to be used as a guide only; not a specification. The data herein is based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only, each lot number will vary from the published data. This product is suitable for use in direct food contact applications under the applicable requirements of 21CFR177.1550.


Documents

Product Datasheet Icon

Reviews

There are no reviews yet.

Be the first to review “Non-Porous Teflon® Coated Fiberglass”

Your email address will not be published. Required fields are marked *