Econostitch® Peel Ply

$645.00$1,935.00

SKU: VC-ECONOSTITCH

Econostitch® is a non-coated nylon peel ply fabric with red tracers which make this peel ply more visible before and after cure, reducing the possibility of the peel ply being left of the part. It is used directly against the laminate when a textured surface is required.
Product Datasheet IconSafety Datasheet Icon

Description

Airtech’s Econostitch® is an economical, heat set and scoured peel ply with good performance when used with both polyester and epoxy resins. It features red tracers for high visibility before and after cure, reducing the possibility of the peel ply being left of the part.

Econostitch® is designed to allow resin to bleed through the material producing a textured, bondable finished surface and can be used in resin infusion or hand lay-up processes. It can assist or eliminate the need for sanding for abrading on your composite laminate. It is suitable in vacuum bagging applications up to 375°F (190°C).

Features/Benefits

  • Produces a finished textured surface which reduces the time of hand finishing
  • Cost effective bagging material
  • Red pin stripes make fabric more visible to minimize risk of leaving in place after cure

Technical

Physical Properties

  • Thickness: .006″
  • Material: Nylon
  • Color: White Tracer:
  • Red Extracables: <0.5% by weight
  • Shelf Life: Indefinite
  • Weight: 2.6 oz/yd2
  • Manufacturer: Airtech International
  • Manufacturer Part Number: Econostitch®

Technical Properties

  • Maximum Temp Use: 375 °F (190 °C)

Please note: All data to be used as a guide only; not a specification.


Documents

Product Datasheet IconSafety Datasheet Icon

Reviews

There are no reviews yet.

Be the first to review “Econostitch® Peel Ply”

Your email address will not be published. Required fields are marked *