PRO-SET LAM-226 Hardener – Medium

$125.76$380.58

SKU: E-PROSET-LAM-226

The PRO-SET Laminating Epoxy 226 Medium Cure is great when you need a little extra time to work with your project to get it just right. This product has a working time of 2 to 3 hours and will fully gel in about 4 to 5 hours at 77°F.

Product Datasheet IconSafety Datasheet Icon

Description

PRO-SET 226 Hardener is mixed with PRO-SET Resins to provide medium pot life and cure time. PRO-SET 226 Hardener has a medium cure speed which provides 2 to 3 hours working time at 77°F. A typical laminate will be gelled in approximately 4 to 5 hours at 77°F.

Not sold as a kit. Must order Resin in addition to one of the hardeners.
Domestic Shipping via Ground Only

⚠️WARNING: This product can expose you to chemicals including Benzene which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical

Documents

Product Datasheet IconSafety Datasheet Icon

Physical Properties Mixed with 125/135 Resin

  • Mix Ratio:
    • Volume: 3.5 parts resin to 1 part hardener
    • Weight: 3 parts resin to 1 part hardener
  • 150g Pot Life (125 Resin): 88 minutes @ 72°F
  • 150g Pot Life (135 Resin): 75 minutes @ 72°F
  • Working Time: 2 to 3 Hours @ 77°F
  • Gelled: 4 to 5 Hours
  • Cure: Room Temperature
  • : Clear

  Technical Properties Mixed with 125 Resin

  • Viscosity, Mixed: 586 cP
  • Density, Cured: 9.71 lb/gal @ 72°F
  • Hardness: 85 Type D
  • Compression Yield: 16,200 psi
  • Tensile Strength: 9,120 psi
  • Tensile Modulus: 5.65E+05 psi
  • Tensile Elongation: 1.9%
  • Flexural Strength: 13,800 psi
  • Flexural Modulus: 5.23E+05 psi

  Technical Properties Mixed with 135 Resin

  • Viscosity, Mixed: 1076 cP
  • Density, Cured: 9.76 lb/gal @ 72°F
  • Hardness: 86 Type D
  • Compression Yield: 15,800 psi
  • Tensile Strength: 8,130 psi
  • Tensile Modulus: 5.41E+05 psi
  • Tensile Elongation: 1.7%
  • Flexural Strength: 11,500 psi
  • Flexural Modulus: 5.20E+05 psi

Please note: All data to be used as a guide only; not a specification. Tests are performed at @ 72°F x 4 weeks.

Resources

How to Guides Preventing Bubbles in Epoxy Resin

Shipping

Due to U.S. Department of Transportation Hazardous Materials regulations and International Air Transport regulations we can only ship this product by domestic ground service within the contiguous United States. Limited Quantities are stocked to ensure maximum shelf life of material, please allow a 2-3 week lead time from the date your order is placed. If stock is available it will ship within the standard 2-3 day processing time.

Reviews

There are no reviews yet.

Be the first to review “PRO-SET LAM-226 Hardener – Medium”

Your email address will not be published. Required fields are marked *