Partall® One-Coat

$21.30$222.15

SKU: XS-VS-ONE-COAT

Partall® One-Coat is a water-based polyvinyl alcohol (PVA – Parting Film) coating made up of solvent-resistant, film-forming materials.

Product Datasheet IconSafety Datasheet Icon

Description

Partall® One-Coat is a water-based polyvinyl alcohol (PVA – Parting Film) coating made up of solvent-resistant, film-forming materials. It contains 2-3 times the solids content of standard PVA coatings, giving it a thick viscosity that builds quickly. It is commonly used as parting film between polyester, vinyl ester or epoxy resins and various mold surfaces or as a release barrier when making rigid support shells for elastomeric rubber molds. It is not recommended for use with molds or resins (e.g., phenolics) containing water or giving off water during cure.

Partall® One-Coat releases easily from mold or part surface or application equipment by peeling off in a continuous skin or by dissolving with water and scrubbing with a soft bristle brush or sponge.

Technical

Physical Properties

  • Appearance: Clear Liquid
  • Odor: Neutral
  • Drying Time: 15-60 minutes
  • Coverage: One gallon covers approximately 400 ft²

Technical Properties

  • Boiling Point: > 200°F
  • Specific Gravity (H20=1): 1.05

Please note: All data to be used as a guide only; not a specification.

 


Documents

Product Datasheet IconSafety Datasheet Icon

Resources

Application

  • Clean and Prep Mold
  • Apply Partall® One-Coat according to Directions for Use Directions for Use
  • Film should be very smooth and glossy when dry.

Reviews

There are no reviews yet.

Be the first to review “Partall® One-Coat”

Your email address will not be published. Required fields are marked *

Clearance